In-mold labeling: preprinted BOPP synthetic paper is placed into a mold that has to be shaped into a final product. The product can be anything, e.g., a butter tub. So, the melted polypropylene is poured into the mold, combined with the label, and the mold’s shape is assumed. As a result, the label and package merge.
This is among the most significant choices for high-end, reliable, flexible, and long-lasting labeling solutions Bousn Filmpack opts for various uses. Additional unique benefits of IML include cost-effectiveness and higher-quality plastic molded products.
It has long been well-liked in both Europe and the US. China has begun employing it extensively after observing and waiting for two or three years. PP, PE, PET, and other material-based blow molding and injection molding products are the primary applications for in-mold labeling. You can trust Bousn Filmpack’s IML as it is famous for the unique qualities of its IML products.
Technical Data Sheet
| Properties | Test Methods | Unit | Typical Data | |
| Mechanical Properties | ||||
| Tensile Strength | MD | ASTM D882 | N/mm2 | ≥60 |
| TD | ≥120 | |||
| Elongation at break | MD | ASTM D882 | % | ≤190 |
| TD | ≤30 | |||
| Physical Properties | ||||
| Coefficient of friction | ASTM D1894 | / | 0.38/0.36 | |
| Density | ASTM D792 | g/cm3 | 0.60 | |
| Gloss | ASTM D2457 | % | ≥260 | |
| Haze | ASTM D1003 | % | ≥96.4 | |
| Thermal Properties | ||||
| Heat Shrinkage | MD | ASTM D1204 120℃/2min |
% | ≤3 |
| TD | ≤1.0 | |||
| Other Properties | ||||
| Surface tension | Corona Side | ASTM D2578 | Dyne | ≥38 |
| Standard thickness: 40, 45, 60. 65, 70, 75 micron | ||||






Reviews
There are no reviews yet.